Micromod RetroPAK: SLC Configuration Manual Manual do Utilizador descarregar pdf (Página 391)

100

101

Extras – Reject to Manual

GENERAL DESCRIPTION

The Reject to Manual compound sends a logical Zero output when its digital input does a

low to high transition.

UTILIZATION

The MOD 30ML/MODCELL compound Reject to Manual uses an Ex (expression) and a

Supervisory message block.

Figure R .1.

Reject to Manual

There are 2 inputs to this compound. The SQUALLOGIC.S1 is a discrete input. Connect

any discrete signal to this input. On a LOW to HIGH transition, this input enables a ZERO

output from the compound at the TRIGGER.S2 signal.

For example a result quality can be connected to the S1 input as the trigger source and PID

block’s output mode status (OPMS) can be connected to the S2 input.

The output connection is actually reversed i.e. though flow of signal is from the

compound’s S2 signal to the PID block’s OPMS attribute, the physical connection should

be made from the OPMS attribute to the S2 signal.

R - 1

1 2 ... 386 387 388 389 390 391 392 393 394

Comentários a estes Manuais

Sem comentários

Micromod RetroPAK: SLC Configuration Manual Manual do Utilizador Página 391

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Micromod RetroPAK: SLC Configuration Manual