Micromod Micro-DCI: 53SL5100A Single Loop Controller Manual do Utilizador descarregar pdf (Página 86)

Single Loop Process Controller Instruction Manual

78 Ratio PID Controller

Table 7-1. Ratio (PID) Controller Pushbutton Functions

Button Title Operator Mode Engineering Mode

R/L

Ratio/Local Select R indicates Ratio control whereby

the controller maintains a set

proportion between the wild variable

line and the controlled variable line.

When in Ratio, an R appears in the

lower right of the display. When in

Local, an L appears in the lower right

of the display.

↑

Ratio / Setpoint

Increase

(EMODE Character

Select)

The ratio / setpoint indicator

increases (rises) when this

pushbutton is pressed and held.

Release the pushbutton when the

desired level is reached.

For configure or display functions,

the character set displays one

character at a time in ascending

alphanumeric order when this

pushbutton is pressed and held.

Release the pushbutton when the

desired character, number, or

symbol appears.

↓

Ratio / Setpoint

Decrease

(EMODE Character

Select)

The ratio / setpoint indicator

decreases (falls) when this

pushbutton is pressed and held.

Release the pushbutton when the

desired level is reached.

For configure or display functions,

the character set displays one

character at a time in decending

alphanumeric order when this

pushbutton is pressed and held.

Release the pushbutton when the

desired character, number, or

symbol appears.

A/M

Auto/Manual Select This pushbutton is the Auto/Manual

mode toggle.

When toggled to Auto, an A appears

before the R or L (for Ratio or Local),

in the lower right of the display.

When toggled to Manual, an M

appears before the R or L (for Ratio

or Local), in the lower right of the

display.

Auto indicates the process is under

instrument control.

Manual indicates the process is

controlled by the instrument panel

push buttons (e.g., output increase

and decrease).

←

Output Decrease

(EMODE Cursor

Control)

The output indicator decreases when

this pushbutton is pressed and held.

Release the pushbutton when the

desired output level is reached. This

pushbutton is for Manual operation

only.

For configure or display functions,

the cursor shifts one position to the

left each time this pushbutton is

pressed. When pressed and held,

characters continue to shift left one

position at a time. Maximum

character length is 10 characters (9

character shifts).

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 151 152

Comentários a estes Manuais

Sem comentários

Micromod Micro-DCI: 53SL5100A Single Loop Controller Manual do Utilizador Página 86

Comentários a estes Manuais

Manuais e produtos relacionados com Equipamento Micromod Micro-DCI: 53SL5100A Single Loop Controller