Micromod MOD: 30ML Controller Operation and Maintenance Tra Manual do Utilizador descarregar pdf (Página 47)

Training Manual

Single Loop Template Lab

3 - 25

3.3.13 Install the edited template

1 Press UP CMP LIST FIC 100 is displayed on lines 1

and 2.

2 Press NXT CMP LIST is displayed on line 1; lines 2 and 6

are blank

3 Press UP EDIT TEMPLATE displayed on lines 1 and 2.

4 Press NXT INSTALL TEMPLATE displayed

5 Press DOWN. Select INITWARM INSTALL TYPE displayed.

6 Press ENT This compiles your configuration and loads it into

runtime memory.

You should now see the FIC-100 display. Line 2

will display the process variable and the EU

(GPM). Line 6 will display the output (50%)

7 Press the SCROLL key to see the

Setpoint at the bottom.

8 Operate your PID loop by changing the

output, setpoint and also by getting into

TUNING mode and by changing the

GAIN and RESET values.

Refer to the MOD 30ML Operation Lab 1 for more

information on operating the PID loop.

Figure 3 .25.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 73 74

Sem comentários

Micromod MOD: 30ML Controller Operation and Maintenance Tra Manual do Utilizador Página 47